For all kinds of materials which are difficult to paste up and also for absorbent materials.
Max1 accelerator enables…
- Intensification of the stickiness
- Shortening of the hardening time
- Sticking of very small parts
How to use:
- Both sides must be clean and grease free.
- Lay on max1 accelerator on one side and then let it ventilate for 12-20 seconds.
- Put max1 glue – the strong adhesive – on the other side.
- Immediately join both parts together.
- Hold parts pressed in place for 10 seconds.
Attention!
Avoid touching the point of the adhesive bottle with the max1 accelerator!
Otherwise, the point of the max1 adhesive bottle will immediately harden!
